C86300 bronze round
Morgan Bronze Products, Inc. specializes in C86300 bronze round.
We are an ISO 9001:2015 and AS9100D registered corporation that stocks C86300 bronze round and manufacturers innovative turnkey solutions.
Your C86300 bronze round is available in rectangles, rounds, tubes and other shapes.
C86300 Bronze is also commonly referred to as CDA86300 Bronze. The Unified Numbering System (UNS) is the accepted alloy designation system in North America which uses the C86300 Bronze
This manganese bronze, alloy C86300 can be produced in 3 ways, continuous cast, centrifugal cast, or sand cast.
C86300 Bronze is a high strength alloy used as bushings, bearings, gears, gibs, screw down nuts, bridge pins, valve stems and hydraulic cylinder parts.
This alloy is generally used in heavy load applications. It performs best at low speeds with reliable lubrication. It finds use in Steel Mill Equipment, Wood Pulp Industry, Marine Applications and Earth Moving Machinery.
Our specialists in foundry alloyed products and metals warehousing services make it easy to source your exact C86300 bronze round needs.
At Morgan we have a commitment to zero C86300 bronze round defects, minimizing your cost of possession while preventing supply chain interruptions.
Your C86300 bronze round is in stock and our customer service is ready to get it out right now.
For years Morgan has helped customers by providing C86300 bronze round various levels of inventory management. From simple blanket orders and multiple releases to providing shelf replenishment delivery and stocking services, our goal is always the same; keep your operation running without inconvenience and your cost of possession at a minimum. Our Kan-Ban Packaging and Inventory Management programs provide “Just In Time” delivery, ensuring you have the right product at the right time while meeting your company’s performance objectives. Whether it’s Kan-Ban quantities on your shelf or ours, or daily deliveries, you’ll find us capable. It just another part of value we offer at Morgan.
Other terms for this alloy are: Manganese Bronze Bar, CDA 86300, High Tensile Manganese Bronze, SAE 430 B, SAE430B, ASTM B147-8C, High Strength Yellow Brass, ASTM B505-C 86300, ASTM B271-C 86300, Manganese Bronze Rounds, Manganese Bronze Tubes, SAE J461; SAE J462, AMS 4862, MIL C 15345 Alloy 6, QQC 390 Alloy 86300, MIL C22229 Composition 8, Ingot # 424.
In addition to C86300 bronze round Morgan Bronze Products, Inc. provides custom machined and we stock manufacture solutions.
Check out our library reference section for C86300 bronze round and other metals material specifications and other technical attributes.
Morgan Bronze provides C86300 bronze round warehousing services.
In addition to C86300 bronze round we provide many machined alloys and metals for the aerospace and defense, commercial truck, heavy equipment and mining, hydraulics, oil & gas and pump and valve and actuation industries.
We are located in Lake Zurich, IL and supply C86300 bronze round in Illinois, Wisconsin, Indiana, Michigan, Iowa, Missouri, Arkansas, Tennessee, Kentucky, Ohio, Pennsylvania, New Jersey, New York, North Carolina, California, Washington, Georgia, Texas, Oklahoma, Arizona and other regions.
For a fast C86300 bronze round quote or consultation simply fill out our contact us form or call 847-526-6000 or email info@morganbronze.com
Product Description
C932 Bronze | SAE 660 | C93200 (SAE 660) High Lead Tin Bearing Bronze is our most popular alloy.
Other terms for this alloy are: Bronze Bar, C 932, C932 Bronze, Bearing Bronze , SAE 660, SAE660, 932 Bronze Rounds, 932 Bronze Tubes, 932 Bronze Rectangles, Leaded Bronze, UNS 93200, Ingot # 315, Asarcon 773, CDA 93200, SAE J461; SAE J462, ASTM B-271 Alloy C93200, ASTM B-505 Alloy C93200, QQC-390 Alloy E7, Mil B-11553-12, 83-7-7-3.
Notice: The weights listed are the best estimates of the actual weights we will ship. They are a combination of the calculated theoretical weights and an average of actual weights. Our weights are conservative to the heavier side but there may be slight variations in weight from bar to bar.
The Physical, Fabrication and Thermal Properties shown here represent reasonable approximations suitable for general engineering use. Due to commercial variations in compositions and to manufacturing limitations, they should not be used for specification purposes.
C932 Bronze Stock Allowances: Rectangle and Square
| Finished Width, Inches | Thickness | Width |
|---|---|---|
| Up to 3.999″ inclusive | +0.190″ to +0.141″ | +0.109″ to + 0.141″ |
| 4″ to 5″ inclusive | +0.109″ to +0.141″ | +0.109″ to + 0.141″ |
| Over 5.000″ | +0.109″ to +0.141″ | +0.109″ to +0.141″ |
NOTICE: The weights listed are the best estimates of the actual weights we will ship. They are a combination of the calculated theoretical weights and an average of actual weights. Our weights are conservative to the heavier side but there may be slight variations in weight from bar to bar.
C932 Bronze Equivalent Specifications
| ASTM B505/B505M (Copper Alloy UNS No. 93200 Continuous Cast) |
| ASTM B271 (Copper Alloy UNS No. 93200 Centrifugal Cast) |
C932 Bronze Reference Specifications
| SAE | Federal Specification | Military Specification | Ingot Number | CDA |
|---|---|---|---|---|
| SAE 660 SAE J461 SAE J462 | QQ-C-390 TYPE III | MIL-B-11553 Comp. 12 | 315 | C93200 |
Equivalent specifications are verified and updated annually.
Specifications shown are current as of May 4, 2010.
C932 Bronze Chemical Composition (%)**
| Cu | Sn | Pb | Zn | Fe | Ni | Sb | P | S | Al | Si |
|---|---|---|---|---|---|---|---|---|---|---|
| 81.0 – 85.0*** | 6.3 – 7.5 | 6.0 – 8.0 | 2.0 – 4.0 | 0.20 max. | 1.00* max. | 0.35 max. | 1.50 max. | 0.08 max. | 0.005 max. | 0.005 max. |
| Sum of all named elements = 99.0% | ||||||||||
C932 Bronze Physical Properties
| English | Metric | |
|---|---|---|
| Melting Point – Liquidus | 1790°F | 977°C |
| Melting Point – Solidus | 1570°F | 854°C |
| Density | 0.322 lb/in3 at 68°F | 8.91 gm/cm3 @ 20°C |
| Specific Gravity | 8.910 | 8.91 |
| Electrical Conductivity | 12% IACS @ 68°F | 0.07 MegaSiemens/cm@ 20°C |
| Thermal Conductivity | 33.60 Btu · ft/(hr · ft2 · °F) @ 68°F | 58.2 W/m · °K @ 20°C |
| Coefficient of Thermal Expansion | 10 · 10-6 per °F (68-212°F) | 18.0 · 10-6 per °C (20-100 C) |
| Specific Heat Capacity | 0.090 Btu/lb/°F @ 68°F | 377.1 J/kg · °K @ 293°K |
| Modulus of Elasticity in Tension | 14,500 ksi | 100,000 MPa |
Physical Properties provided by CDA
C932 Bronze Mechanical Properties
| English | Metric | |
|---|---|---|
| Tensile Strength, min. | 35 ksi | 241 MPa |
| Yield Strength, min. | 20 ksi | 138 MPa |
| Elongation in 2 in. or 50 mm, min. | 10% | 10% |
** Values shown pertain to ASTM B505/505M only. Values for ASTM B271 differ slightly. Contact our QA department for clarification.
* Nickel including Cobalt
*** In determining copper minimum, copper may be calculated as copper plus nickel.
Machinability Rating 70 (Free Cutting Brass = 100)
C932 Bronze Fabrication Practices
| Soldering | Excellent |
|---|---|
| Brazing | Good |
| Oxyacetylene Welding | Not Recommended |
| Gas Shielded Arc Welding | Not Recommended |
| Coated Metal Arc Welding | Not Recommended |
Fabrication Practices provided by CDA
C932 Bronze Thermal Properties
| Stress Relieving Temperatures | 500 F or 260 C |
|---|---|
| Time @ Temperature | 1 Hr. per inch of wall thickness |
| Responds to Heat Treatment | No |
Notice: The weights listed are the best estimates of the actual weights we will ship. They are a combination of the calculated theoretical weights and an average of actual weights. Our weights are conservative to the heavier side but there may be slight variations in weight from bar to bar.
The Physical, Fabrication and Thermal Properties shown here represent reasonable approximations suitable for general engineering use. Due to commercial variations in compositions and to manufacturing limitations, they should not be used for specification purposes.
